签到最新话题最热话题

懒虫工控

 找回密码
 立即注册

QQ登录

只需一步,快速开始

扫一扫,访问微社区

查看: 1476|回复: 3

[已解答] HART375里面这几段话的含义

[复制链接] |关注本帖

签到天数: 75 天

连续签到: 1 天

[LV.6]虫坛居民III

发表于 2016-12-14 14:18:20 | 显示全部楼层 |阅读模式
看到王天泽在现场仪表版说的HART375的极性问题,但是都是英文,看不懂啊。原文:手持终端的两根通讯线有极性吗
Connect the 375 Field Communicator with the appropriate connectors in parallel with the instrument or load resistor. The HART connections are not polarity sensitive.
In order for the 375 Field Communicator to function properly, a minimum of 250 ohms resistance must be present in the HART loop. There are three terminals on the top of the 375 Field Communicator.
Two of them are red and one of them is black. Each red terminal is a positive connection for its protocol. The black terminal is a common shared by both protocols. There is an access door to ensure that only one pair of terminals is exposed at any one time; see Figure 3-1. There are several markings to indicate which pair of terminals is for which protocol.

评分

参与人数 1虫币 +3 收起 理由
懒虫工控 + 3 发起议题!

查看全部评分

回复

使用道具 举报

签到天数: 137 天

连续签到: 1 天

[LV.7]以坛为家I

发表于 2016-12-15 14:40:09 | 显示全部楼层
Connect the 375 Field Communicator with the appropriate connectors in parallel with the instrument or load resistor. The HART connections are not polarity sensitive.
使用适当的连接器将375现场通讯器与仪器或负载电阻并联。 HART连接不对极性敏感。
In order for the 375 Field Communicator to function properly, a minimum of 250 ohms resistance must be present in the HART loop. There are three terminals on the top of the 375 Field Communicator.
为了使375现场通讯器正常工作,HART回路中必须至少存在250欧姆的电阻。 375现场通讯器顶部有三个端子。
Two of them are red and one of them is black. Each red terminal is a positive connection for its protocol. The black terminal is a common shared by both protocols. There is an access door to ensure that only one pair of terminals is exposed at any one time; see Figure 3-1. There are several markings to indicate which pair of terminals is for which protocol.
其中两个是红色的,其中一个是黑色的。 每个红色端子是其协议的正连接。 黑色终端是两种协议共享的。 有一个检修门,以确保只有一对端子在任何时间暴露; 参见图3-1。 有几个标记来指示哪一对终端是哪个协议。

评分

参与人数 1虫币 +5 收起 理由
gubai0348 + 5 帮助他人解答!

查看全部评分

回复 支持 1 反对 0

使用道具 举报

签到天数: 49 天

连续签到: 1 天

[LV.5]虫坛居民II

发表于 2016-12-15 14:43:04 | 显示全部楼层

将375与仪表并接,HART协议对极性无要求,为了通讯正常,请确保HART回路至少有250欧姆电阻。375的顶端有3个接线端,2红1黑。每一个红色都是它的协议的正极,黑色是公共端。但每次只能由一个协议可用,如图3-1,有几个标识表明哪对端子对应哪个协议。
[发帖际遇]: gubai0348 乐于助人,奖励 3 虫币. 幸运榜 / 衰神榜
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

回帖奖励

[详情]

  • * 每天自己主题被回复3次可获得额外3虫币奖励。
  • * 每天回复他人主题5次可获得额外10虫币的奖励。
  • * 奖励每天都可领取,一定要多参与论坛讨论哦。
  • * 同一主题的重复回复不计。
  • 
    关闭

    站长推荐上一条 /1 下一条

    QQ|手机版|小黑屋|懒虫工控 ( 陕ICP备15016442号 )|网站地图  

    GMT+8, 2019-10-17 20:35 , Processed in 0.264575 second(s), 31 queries .

    Powered by 懒虫工控

    © 2016-2020 LCGK

    快速回复 返回顶部 返回列表